SCHOLARSHIP APPLICATION: (Deadline: APRIL 30th, 2026)
Please ensure all fields are filled in completely.To view previous winner: Click Here
(IF YOU HAVE ANY QUESTIONS, PLEASE EMAIL THE PROGRAM ADMINISTRATOR AT RYAN@STUDENTSCHOLARSHIPS.ORG)
Used Parts for Forklift
Used Forklift Parts - In the long run, lift truck parts would wear and have to be replaced. Acquiring brand new parts could become a costly endeavor so another idea is to acquire used lift truck parts. This could save much money in the end. It is a good idea to obtain used forklift components that have been remanufactured. These components will guarantee that you are getting components which would work for a long time and be productive.
Worn or broken parts which are remanufactured are a cheaper answer compared to rebuilding. With rebuilding components, just the components that are worn out or broken get changed, which means that other wearable components can break down soon after purchase.
Remanufacturing on the other hand provides the best guarantee for second-hand components. Reproduced components are taken apart and cleaned and then all wearable pieces are changed. All wearable components are replaced regardless of age or wear which is another rationale why reproduced parts overall function so much better. Any part within the part is new and this offers far longer life to the used part. Based on the forklift parts that are being redone, the cleaning process and the whole remanufacturing process will vary.
The engines are cleaned after a complete disassembly. Various engine parts like for example rings, pistons, spark plugs, valve springs, filters, and valves can be replaced during the process of remanufacturing. The engines are hot tested after reassembly to ensure that there are no noise, no oil pressure problems, no leaks or any vacuum.
Transmissions are one more thing that is oven cleaned after being disassembled. The transmission is then washed. A thorough inspection is done to check for any cracks. Seals, bearings and bushings are all replaced. Typically, the replacement components used on transmission parts meet OEM specifications.
A few parts such as the alternator, the water pump, torque converters, steer axles and the starter could obtain longer serviceability after being reproduced and having all wearable parts replaced. The electronic control in the electric forklift is maintained by the control card. This particular card can also be reproduced with replacing all aged and worn out components. Unlike various lift truck parts the control card could only have the worn and aged components replaced.
Components that are reproduced have to be comprehensively checked upon reassembly to guarantee they are in good condition previous to being sold. When acquiring these parts, it is a good idea to make certain that they have undergone all of the proper testing and inspections. On certain bigger parts such as engines, transmissions and steer axles, OEM specification replacement components should be utilized.
The forklift dealer could guarantee that the parts they have reproduced meet the OEM specifications. This would even ensure the parts meet industry standards. Lots of details go into remanufacturing second-hand parts. This attention to detail provides more serviceability out of remanufactured components opposed to the components that were just rebuilt.
Click to Download the pdf
Forklift Parts
Lift Parts Express
TOLL FREE: 1-888-695-7994
Valdez, Alaska
forkliftpartsvaldez.com
Email Us
About Us